DLink wireless camera DCS-5220 configuration

---

Use the installation wizard from this site:
http://support.dlink.com/products/view.a sp?productid=DCS%2D5220

and the Network Magic tool from the same site. There's a Faq here that includes most major configuration problems.

I was wondering if any one can help me configure a IP cam so I can monitor my home in my office. I purchased a security IP cam the model is DCS-900 and the brand Dlink. Im able to configure the cam in me home but when I try to check it any where else

---

1. Get a domain name
2. Use a dynamic DNS (DDNS) client on your computer to automatically register your public IP to a DDNS server.
In short, the dynamic DNS client will automatically register whatever public IP address your computer has

I was running a Dlink DCS 900W camera in wireless mode for 36 hours without problem when suddenly my USR 8054 started restarting every 30 seconds until I took the camera off line. I have never seen this kind of issue b4. Any ideas what could be happening

---

I think your camera's wireless client adapter is crashing the router firmware. It maybe sending some non compliant signals which could be unsettling the router. Since routers are typically tested rigorously for compliance by FCC, you should consider replacing